FPR Shim and 10K mod

[binder man]

wow thats weird I had a 10K in and didn't like it but for sheids I'd like to have a lil lope so I JUST went out and bought a 10K and 5.6K....and my radio shack had down to 1K

[blizzardwarrior7]

My truck runs perfect with the 5.6k resistor in it, although that could have something to do with the fact that I have a bad ICP sensor....If I put the 1k in, it sounds like a tractor and pours white smoke at an idle, but sometimes it wont start.

[Jake]

Originally Posted by redstroker_2002

Whats AIH delete??

Air intake heater.

Check this out so i dont' have to repeat it on this thread.
10K Mod Problem

---

Last edited by Jake : 08-07-2008 at 07:10 PM.

[binder man]

WOW just put in the 5.6 and its amazing....I HATED my 10 with a passion but this thing drives a bunch better than it did with the 10K

[TurboSevenThree]

I said splice on an OBS cause I read that on the writeup on here. I could be wrong though lol

So y'all like the 5.6k version. It's interesting how it works. I like it, but I wanna try a lower one.

---

Last edited by TurboSevenThree : 08-08-2008 at 04:51 PM.

[binder man]

I just did another OBS and didn't have to splice. I don't wanna go much lower than 5.6 because it feels like its gonna shake apart already

[southern7.3]

back to the fpr shim.....you take out the fuel filter and its a pipe with a spring in it. You take it off put a bb in it, put the spring back, and put it back together?

[GM Duraturd]

Originally Posted by southern7.3

back to the fpr shim.....you take out the fuel filter and its a pipe with a spring in it. You take it off put a bb in it, put the spring back, and put it back together?

You dont have to take out the fuel filter. Its the pipe going into the fuel filter. You take out an end nut with a 13mm wrench and the spring is right in there, add bb and reassemble. *This is on an OBS, may be slightly different on a SD*

[southern7.3]

yea i seen a write up. asked questions before i read and searched...my bad....ill check it out in a minute where it looks the same or not.

[TurboSevenThree]

Originally Posted by binder man

I just did another OBS and didn't have to splice. I don't wanna go much lower than 5.6 because it feels like its gonna shake apart already

ABOBB has had his 4.4k resistor in there for a bunch of thousands of miles and hasn't had a problem.