![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
rear wheels binding
Hi, when I pulled out of my driveway I touched the brakes and my truck stopped like I hit a wall. I then needed to pull out of a parking spot and my truck would allow me to shift into reverse (6 sp manual) but felt like I was pushing against a wall. Out of gear it doesn't move backwards much. Could this be brakes????Rolls fine forward... HELP!
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
no idea
![]()
|
|
|||
|
Check to make sure the brake calipers arent loose or sticking. I had this problem and found that my caliper slides were stuck and then I also found that the bolt that bolts the caliper mounting bracket to the knuckle had backed its way out, and caused the caliper to hit the wheels and bind up. I would also check to make sure your e-brake is not depressed or the cable is not tight causing the brakes to constanly be on.
|
|
|||
|
wow. Thats a good one. Hope theres nothing wrong with the rear end. good luck!
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|