HELP, no speedo, odometer, cruise and abs light

[schwarz_06]

ok i just got my truck back from the collision shop after a lil wreck, few things goin on tho, the speedometer, odometer, cruise control doesnt work and abs light is on. any help would be great.

[strokin_early_99]

VSS, vehicle speed sensor, quit working on you. It is on the rear axle above the pinion. You need a new one. Dealer item, should be about $25.

I had it happen 6 months ago. 5 minute fix. All you need is a 10mm wrench or socket.

[schwarz_06]

Ok, I replaced the VSS but still have my problems any more help??

[BadAss01F250]

there is a cheap little sensor in your steering column, i had a little wreck with my truck a few years ago and and cruise control wouldn't work (the buttons on the steering for cruise wouldnt light up either) and the abs light stayed on. its bothering me that i cant think of the name of that sensor but that might be your problem...someone on here might know what im talking about

[Rob]

look under that dash and check fuses related to the ABS, cruise and so on. then make sure everything is connected under the dash, hood etc..

[fordnut85]

What kind of body work did they do?? If we know what they were working on we might be able to point you in the right direction to something they either left disconnected or damaged.

[schwarz_06]

passenger side:fender/inner fender, headlight unit, grill, bumper. and im sure there was a bunch more crap on the inside im clue less as far as to the exact stuff. i talked to my insurance company and they are sending an adjuster out this week and its prolly goin to the dealer. i would just rather get it done myself that way i know i'll have it for my trip home on the 18th. getting leave in the military these days is kinda hard. but any help from you guys would be great.

[strokin_early_99]

Do you have front ABS? If yes, Have you looked at the hub bearing to see if the plug is loose or if they did not plug it back in? or broke or something like that.

[schwarz_06]

I checked the line going into the front right spindle. it was connected at the point by the inner fender but i didnt examine to see the exact spot where its connected into the actual spindle. one of my friends tried to pull the codes today but the reader couldnt get any communication with the abs module. so when its light out tommorrow im going to look as hard as i can at the module. but if anyway still has advice keep it flowin, this marine is havin a tough time judging speed.

[schwarz_06]

BUMP! im waiting on the insurance company to get back to me but if anyone has anymore info please send it my way, how much would this module issue set me back if i have to deal with it myself??