Auto Enginuity

Fast_Frank · #1 (**permalink**) 11-24-2007, 08:12 AM

what do you guys think about this scanner? what can it scan? diesel's and ford gasers? any info you guy's can give would be great!
thanks

**Dave** · #2 (**permalink**) 11-24-2007, 08:13 AM

Its awesome. but you have to get the Powerstroke pack for it to work with the diesel. A few members here have it

***Ditty*** · #3 (**permalink**) 11-24-2007, 08:15 AM

PM LordTauk. He has one and it's friggin sweet. We hooked it up to my truck at the track and did all sorts of stuff with it. I was amazed.

Fast_Frank · #4 (**permalink**) 11-24-2007, 08:29 AM

cool can you run tests like the buzz test and look at what the hpop is putting out?

***Ditty*** · #5 (**permalink**) 11-24-2007, 08:30 AM

Yep. You can monitor like 12 different sensors on one of the screens.

***NCHornet*** · #6 (**permalink**) 11-24-2007, 08:59 AM

It is by far the best diagnostic device you can own for our trucks. It will run many different diagnostic tests and monitor many different variables. I have my SCT Xcal2 and it reads and clears codes and will do quite a bit of live log functions, but if I ever need something more it will be the AE for me!!!

Fast_Frank · #7 (**permalink**) 11-24-2007, 10:19 AM

can it pull tranny codes and look at tranny functions?

***Ditty*** · #8 (**permalink**) 11-24-2007, 10:24 AM

If it's an auto I think you can. Mine is a manual...so we didn't go through all that.

Fast_Frank · #9 (**permalink**) 11-24-2007, 11:54 AM

hmm ok thanks for all the info

***NCHornet*** · #10 (**permalink**) 11-24-2007, 12:30 PM

Yes it will pull all hard and soft codes as long as you have the PSD bundle pack.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement