Spent WAY too much on exhaust mod (My Saga)...

[Dave]

Sounds awesome doesnt it.
Awesome avatar by the way Office Space rules

[nc1500]

Originally Posted by Dave

Sounds awesome doesnt it.
Awesome avatar by the way Office Space rules

So's yours. That your normal ride?

[Dave]

No Not my normal ride. Thats our town EMS/First Responder truck. Im on the department. Its an 03 PSD 550 4x4

[nc1500]

Originally Posted by Dave

No Not my normal ride. Thats our town EMS/First Responder truck. Im on the department. Its an 03 PSD 550 4x4

You should have brought it to the SSS and run it on they dyno. I wonder what she'd run like with 5" pipe and a chip

[Dave]

Originally Posted by nc1500

You should have brought it to the SSS and run it on they dyno. I wonder what she'd run like with 5" pipe and a chip

That wouldve been cool as he!! to see

[nc1500]

Originally Posted by Dave

That wouldve been cool as he!! to see

Props to a fellow FF.

[NCHornet]

The method Dave explains above is exactly how I did my BTM muffler, which is 3.5" straight through and by rotating 180 degrees it made it a straight shot. My EGt's dropped 100-150 degrees between the AIS/BTM combo, and I have never hit 1250 degrees even when towing heavy, that comes from good air flow and proper tunning. Good Luck

[nc1500]

Pictures are up. Check em' out...

The exhaust looks good.

[nc1500]

Open exhaust, tuner on 3, got almost 20 average at 75 mph, was averaging 15 before.