EBPS and tube removal

[Pipewrench]

This may have been stated somewhere already, just wanted to pass it along.

I removed my EBPS and tube today. I didn't have a crows foot wrench or a 1'' deep well socket.

I used a standard wrench for the tubing, it was difficult but it did come off.
For the sensor I broke it free with what I call a monkey wrench (Pretty much a smooth jawed pipe wrench, looks like a 90 degree crescent wrench) I think some people call them 'auto wrenches' or 'ford wrenches'

Anyway, being offset it was able to fit on the sensor without hitting everything in the process.
Just wanted to pass this along in case anyone wanted to clean theirs and didn't have access to some of the recommended tools.