Did the 4.7 diode boost fooler

[raycub]

Would getting the no code tunes from DP Tuner for 5 extra dollars do the same?? Anybody have the no codes?? Good or bad??

[OregonStroker]

so you splice into the green wire with the banded end of the diode, then the splice the other end into the grey red wire? not inturupting their origional path? i know this sounds stupid but I kinda need a diagram or something so I dont ruin my MAP wiring. thanks.

[RRonning1984]

Originally Posted by dlonno

FYI anyone who wants to do this. I should have about 8 4.7 zener diodes left over by Monday. The diodes themselves cost about a dime but aren't the easiest to find. I'll mail anyone who wants the extra ones for free with a couple wire taps.

Do you have one left?

[XtReMe FrOm HeLL]

how do you know which side is the banded end? i bought them off of ebay but havnt had a chance to do it

[alabamafrog]

Look at the bottom of page 4, a pic is worth 1,000 words, one end of the diode should have a band or stripe or mark on it.

[RRonning1984]

I dont seee it!

[alabamafrog]

[RRonning1984]

I meant the band!

[OregonStroker]

please explain which colors. im at work and cant see the pictures. stupid security software. I need to know which colors cause im going to do the mod in the parking lot. please. help. thank you.

[superduty4x4]

Oregon Stroker- no need to cut wires- just bend the wires on the diode and stuff them into the connector.