![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Now what?! No start now.
So I patch a small leak in the tank, and perform the hutch mod. Truck won't start. Acts like it wants to, but in the end never will spin itself. Changed the CPS with one from an extra 2000 PSD I have here. Don't know for sure if the CPS works, but same thing after I replaced it.
Popped the lines off the tank and they were dry and when I would turn the key on I couldn't feel any suction at all. I know the truck lost prime, but I cycled the pump up to 8 times. I'm stuck and I guess I'm thinking it's the fuel pump. I hear it run but like I said, it doesn't show any signs of suction back at the tank. Could it be air-locked? I need to get this dog running. Any advice on what to check would be appreciated. Do you think I should get a new CPS to be safe? |
| Sponsored Links | ||
Advertisement | ||
|
|||
|
I would look into a fuel pump my buddys truck just did that recently i changed the fuel pump and it fired right up
|
|
|||
|
Fuel pump.... what a pain. Fixed now, runs like a top. So for everyone's future sanity, just because the fuel pump sounds ok, don't mean it is lol!
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|