newbie has a question

[submariner]

from what i have read i know to make my truck perform better im going to need an intake, exaust, guages and a chip. ok cool but what kind, there are so many types of each. can any of you guys give me so good advice. and that i can afford on navy pay. id aprecate all the advice you can give.

[Logan]

Well, really you can got as cheap or as pricey as you want to go. You have a 7.3 right? If you fill out your sig when you get a chance, it will help us help you.

[Ditty]

TO go cheap...do the DIY Tymar...$50-100, FarmBoy's Budget exhaust...$250-ish, Used gauges...See my sig!!! (shameless plug), Programmer...you can get a DP or TS for like $300-400.

I know all about that Navy Pay not going very far!!!

[Logan]

Intake Cheap=Tymar DIY intake $50+/- Aftermarket AFE, airaid, but no K&N $200+

Exhaust Cheap= Cut muff out, weld in straight piece of pipe, under $50
Exhaust full cheap system= FarmboysDiesel Cat back 4" or 5" system. PM for Pricing.
Upper End Exhaust= MBRP, Diamond Eye, Grand Rock, among several others, prolly over $400 for SS

Chip, 4-6 position flip chips.

TS, DP, Wildman...all of these are good. Different prices depending on what ya get.

Guages, ask what is best, or you can go with a stand alone monitoring system like the Quadzilla Commander. Prices Vary

With any of this, pretty much any of the vendors can get ya prices on any of this. Just call them up or send them a PM.

[submariner]

my truck is '02 F-250 with the 7.3 4X4 33" pretty plain i know. help.

[Logan]

Nothing wrong with being plain. They all started out that one at one point.

[submariner]

what is a good intake to put in my truck? are they mostly the same or is there one that is the BEST?

[Brian]

i would do the tymar intake, pretty cheap to do, the filter is like 35$.

[Brian]

DIY Intake

[submariner]

I saw the new air raid intake and read that it got good reviews. do you know if anyone has done a home fabrication for that?