I/C boot pic's
i finnaly put my new boot's on today and ran in to some problems along the way. the biggest being the big ole dent in the tube. i figured out how it got there. last time i tightened my old boot's up i used an air rachet. so figure i got a little caried away with it and crushed the end. i also noticed that the drivers side had some insulation on it and the pass, side didn't. so i took some heat wrap for exhaust and put on there. then wraped it again with some aluminum tape. don't know what i plan to benefit from it but i'm not out anything but some spare heat wrap and aluminum tape. so anyway here's the pic's of the insulation.