fuel pressure gauge goes where under hood?

**Jarrod B** · #1 (**permalink**) 08-01-2010, 07:42 PM

i am going to get ev2 isspro fuel pressure gauge to finish my 4 pod setup. but where does it go on the rear? i was shown some pics but still is not clear. plus it cant mix with veggie oil when i shut off the diesel pump.

**Jarrod B** · #2 (**permalink**) 08-07-2010, 05:52 AM

**Evil Eye** · #3 (**permalink**) 08-07-2010, 06:04 AM

Is that a mechanical or electric gauge? I thought all the EV2 are electric. If that's the case, wouldn't it just be a sender plugged into the fuel pressure port?

LINK

**Jarrod B** · #4 (**permalink**) 08-07-2010, 07:05 AM

i didnt want a mech in the cab. so the ev2s are electric. but i dont know where the sender goes on the fuel housing.

**Dave** · #5 (**permalink**) 08-07-2010, 07:23 AM

http://www.aeswave.com/images/Produc...20sample73.pdf

99BEIGEPOWERSTROKE · #6 (**permalink**) 08-07-2010, 11:27 AM

Bump. I want to know how this works to.

99BEIGEPOWERSTROKE · #7 (**permalink**) 08-27-2010, 05:01 PM

Antone have a good write up on installing electric fuel pressure gauge? Where to get supplies?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement