Gauges

jdparadee · #1 (**permalink**) 07-18-2010, 08:49 PM

so i have a gauge to monitor boost and EGT already. i am wondering about what is involved in installing other gauges. things such as fuel pressure, coolant temp, hpop pressure. i have seen any write ups on how to wire any other gauges other than boost, EGT and trans temp. thanks....

**Strokin6Liters** · #2 (**permalink**) 07-18-2010, 09:04 PM

Here is some great write ups on gauge installs.
DieselManor - Installation Sheets

jdparadee · #3 (**permalink**) 10-24-2010, 09:22 PM

i know this is old, but same topic, i currently have ISSPRO EV2 gauges, because the performax where too expensive at the time. my question is that if i want to upgrade to the performax gaues i assume i would have to pull the sending harnesses back into the engine bay and connect them to the performax unit, but would i have to change the type of senders that i have for the gauges i have now?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement