well got my 6.0 ic in and put a 6.0 oil cooler to use as a tranny cooler. the cool side hump hose was a biatch to get on. had to use soapy water to get it on. wasn't to bad of a deal. the biggest problem was finding out what way to run the new tranny lines. the 6.0 oil cooler mounted right up to were the old tranny cooler mounts (NICE), plus it is huge!!!. i also put another pyro meter in the exhaust manifold besides one in downpipe (what a difference in temps). then i put my boost gauge and 4 gauge pod in. i put the boost hook up in the map fooler line. cut the line and went to put the "t" and realized that the "t" fitting was to small for the map line that auto meter sent me with the gauge. went to ace hardware and they were closed. so went yesterday and made one out of brass parts (which is much better in the long run, not plastic like the original). oh ya, i put amsoil in the trans. but all in all everything went fairly good. but for some reason my tranny gauge doesn't work now. son of a ..... thought that i would let everyone know.
Last edited by 99 7.3; 04-26-2007 at 03:29 AM.