Stock Garrett Turbo...?

ScottnID · #1 (**permalink**) 02-16-2010, 10:36 AM

Sorry for the nube question... but how can I tell if the Garrett turbo on my 99 is stock or if its been upgraded to a ball bearing model... this truck came to me with a 4" monster exhaust and it looks like the down tube might be larger than stock... there also a Allied Signal SS number label on the side of the turbo...

What can you guys tell me...?

S

Dietoremain · #2 (**permalink**) 02-16-2010, 10:50 AM

take a pic of it? the stock turbo is a garrett gtp38 i believe.

ScottnID · #3 (**permalink**) 02-16-2010, 11:11 AM

Here's the turbo and the down pipe...

'92Powerstoker! · #4 (**permalink**) 02-16-2010, 11:21 AM

thats a stocker

ScottnID · #5 (**permalink**) 02-16-2010, 11:45 AM

Thanks guys... stock down pipe as well... looks bigger than what I thought it would... is the stock DP about 3" diam?

F250 Fever · #6 (**permalink**) 02-16-2010, 11:58 AM

it looks like to me your down pipe is bigger than stock by like an inch

no-tel-in · #7 (**permalink**) 02-16-2010, 12:02 PM

Yep, thats a stock turbo, and what looks like a 4" downpipe... Stock dp's don't have that bung welded in

ScottnID · #8 (**permalink**) 02-16-2010, 12:06 PM

Thanks all... consensus, stock turgo, aftermarket DP..., but then thats good for me!

Dietoremain · #9 (**permalink**) 02-16-2010, 02:14 PM

yup looks good!

F250 Fever · #10 (**permalink**) 02-16-2010, 04:51 PM

i hate how my exhaust side of my turbo looks copper too

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement