Need help ASAP!! - Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 13 Old 09-22-2009, 06:11 PM Thread Starter
Compression Ignition Addict
 
99psd's Avatar
 
Join Date: Dec 2008
Posts: 232
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Need help ASAP!!

Hey guys I got a 01 psd,I jus bought an exhaust for th truck,Before I put exhaust on I want to get egt gauge hooked up..Well gauges were in the truck when I bought it,The gauges are isspro gauges w/ a exhaust temp circuit box, also has oil temp gauge also,well while installing probe I see a wire with a connecter for probe? and then I got two wires that have nuts on the ends of them wat are these wires for?? tried explaining best I could. thanks guys for any input

2001 F-250 psd
Isspro gauges(pyro,boost,trans.)
Dp tuner(stock,80econo,120race,140smoke,lope smoke)
4in downpipe-5in exhaust-7in tip
boost fooler
resistor mod
305-70-16 kuhmo mt's
16in eagle alloys
soon to come:
IDM MOD.
ITP return system
leveling kit
99psd is offline  
post #2 of 13 Old 09-22-2009, 06:30 PM Thread Starter
Compression Ignition Addict
 
99psd's Avatar
 
Join Date: Dec 2008
Posts: 232
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
one other question too where on dp should I put the probe?

2001 F-250 psd
Isspro gauges(pyro,boost,trans.)
Dp tuner(stock,80econo,120race,140smoke,lope smoke)
4in downpipe-5in exhaust-7in tip
boost fooler
resistor mod
305-70-16 kuhmo mt's
16in eagle alloys
soon to come:
IDM MOD.
ITP return system
leveling kit
99psd is offline  
post #3 of 13 Old 09-22-2009, 07:33 PM Thread Starter
Compression Ignition Addict
 
99psd's Avatar
 
Join Date: Dec 2008
Posts: 232
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
BUMP BuMP bUmP

2001 F-250 psd
Isspro gauges(pyro,boost,trans.)
Dp tuner(stock,80econo,120race,140smoke,lope smoke)
4in downpipe-5in exhaust-7in tip
boost fooler
resistor mod
305-70-16 kuhmo mt's
16in eagle alloys
soon to come:
IDM MOD.
ITP return system
leveling kit
99psd is offline  
post #4 of 13 Old 09-22-2009, 07:38 PM
powerstrokin

 
drz400smoto's Avatar
 
Join Date: Oct 2007
Location: Fort Collins, CO
Posts: 2,836
Thanks: 3
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Send a message via AIM to drz400smoto
normally you want to put your EGT probe before the turbo so you know the temps before the turbo so you don't harm turbo and have more accurate reading before gasses travel through turbo

--DREW

2001 F350 -- SOLD
ATS Stage 2 Built Tranny, Adrenaline HPOP, AFE Stage 2 Intake, ATS Compressor Housing, Wicked Wheel, Auto Meter Gauges, PHP Chip, 4" MBRP Turbo Back, 4 Inch Lift, 35" Pro Comp Extreme AT, 18" American Racing ATX AX3985, HID Harley Lights, Alpine System, Herculined Rocker Panels, Iron Bull Front Bumper, 5% Tint
386 HP 754 Torque
2012 F150 Lariat Ecoboost
CSP
drz400smoto is offline  
post #5 of 13 Old 09-22-2009, 07:43 PM Thread Starter
Compression Ignition Addict
 
99psd's Avatar
 
Join Date: Dec 2008
Posts: 232
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
quick ? do u happy to know what the 2 wires are under my dash that have nuts on the end of them its not hook up to probe but they are in the bundle of wires that go to the gauges..could it b wiring for the oil temp gauges???

2001 F-250 psd
Isspro gauges(pyro,boost,trans.)
Dp tuner(stock,80econo,120race,140smoke,lope smoke)
4in downpipe-5in exhaust-7in tip
boost fooler
resistor mod
305-70-16 kuhmo mt's
16in eagle alloys
soon to come:
IDM MOD.
ITP return system
leveling kit
99psd is offline  
post #6 of 13 Old 09-22-2009, 07:43 PM Thread Starter
Compression Ignition Addict
 
99psd's Avatar
 
Join Date: Dec 2008
Posts: 232
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
quick ? do u happy to know what the 2 wires are under my dash that have nuts on the end of them its not hook up to probe but they are in the bundle of wires that go to the gauges..could it b wiring for the oil temp gauge???

2001 F-250 psd
Isspro gauges(pyro,boost,trans.)
Dp tuner(stock,80econo,120race,140smoke,lope smoke)
4in downpipe-5in exhaust-7in tip
boost fooler
resistor mod
305-70-16 kuhmo mt's
16in eagle alloys
soon to come:
IDM MOD.
ITP return system
leveling kit
99psd is offline  
post #7 of 13 Old 09-22-2009, 08:05 PM
PMR = JUNK

 
Jake's Avatar
 
Join Date: Nov 2007
Location: NW, Ohio
Posts: 11,225
Thanks: 2
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
Feedback Score: 2 reviews
Send a message via AIM to Jake Send a message via Yahoo to Jake
Show us a pic of the wires in question.

BPS President

2000 F-250, forged rods, 38r turbo, BTS trans, hutch mod, TW tuning and Bad Night Special 50 horse Caterpillar injectors



Quote:
Originally Posted by alberta 7.3 View Post
Yeah, I'd probably feel a bit drained after firing twice in rapid succession.
Jake is offline  
post #8 of 13 Old 09-22-2009, 08:05 PM
PMR = JUNK

 
Jake's Avatar
 
Join Date: Nov 2007
Location: NW, Ohio
Posts: 11,225
Thanks: 2
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
Feedback Score: 2 reviews
Send a message via AIM to Jake Send a message via Yahoo to Jake
And also the pyro probe should go in the exhaust manifold, not the down pipe.

BPS President

2000 F-250, forged rods, 38r turbo, BTS trans, hutch mod, TW tuning and Bad Night Special 50 horse Caterpillar injectors



Quote:
Originally Posted by alberta 7.3 View Post
Yeah, I'd probably feel a bit drained after firing twice in rapid succession.
Jake is offline  
post #9 of 13 Old 09-23-2009, 03:12 AM Thread Starter
Compression Ignition Addict
 
99psd's Avatar
 
Join Date: Dec 2008
Posts: 232
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Google Image Result for http://motorheads.net/vw/turbobus/isspro.jpg a link the pic in top corner is what im workin with the, two wires that have nuts on them are for what??

2001 F-250 psd
Isspro gauges(pyro,boost,trans.)
Dp tuner(stock,80econo,120race,140smoke,lope smoke)
4in downpipe-5in exhaust-7in tip
boost fooler
resistor mod
305-70-16 kuhmo mt's
16in eagle alloys
soon to come:
IDM MOD.
ITP return system
leveling kit
99psd is offline  
post #10 of 13 Old 09-23-2009, 04:57 AM
Compression Ignition Addict
 
Dmstrucks/02's Avatar
 
Join Date: Feb 2009
Location: La Porte,TX
Posts: 243
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
I think those connect to the probe..... does your probe have those same two wires? I got my gauges from diesel manor and they offered that and the whether pack connector

02' PSD, 7.3, 4" Lift on 35's
Isspro-boost,EGT,Trans
AFE Intake, WW!!!
HPO X Line, AIH Delete
08 Rear Diff Cover
5" MBRP Turbo Back,6" tip
Dmstrucks/02 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome