any lowered trucks

[98blownranger]

I want to lower my 2000 F250 2wd
looking to photos, ideas

[Banshee34]

Check out the Rig of the month!

[98blownranger]

how do I find that I see the polls and old winners

[Banshee34]

the ROTM is on the left hand side of the main page. I know there are others on here with lowered rigs too, maybe they'll chime in later.

[-diesel-]

How low do you want it?

[AFBLUE]

Originally Posted by 98blownranger

I want to lower my 2000 F250 2wd
looking to photos, ideas

I know HeavyHauler has his lowered a little, but not nearly as low as the one above. You are on the right track doing it to a 2wd, there isnt much room between the lower cross member and the diff on a 4wd.

[98blownranger]

I like that a lot, that is were I would like mine to sit.

what drop?

[snkepit]

I would like to see more.

[robertcarmel]

Originally Posted by -diesel-

How low do you want it?

That is one SWEET A$$ truck!!!! How is it lowered? Dropped spindles?

[-diesel-]

DJM Dream Beams in the front for a 3" drop. I think my OE springs are a little sagged so I may have another 1" to 1.5" compared to healthy springs.

Rear is a spring under(flip kit) with Procomp 4" lift springs for about a 7" drop.
I am going to add a 1" block to the rear to bring it down just a hair more.

Any lower and you have to notch the frame. I didn't want to notch the frame.

Bilstein shocks all the way around.