So after doing some searching and just coming to grips that I need to throw down some cash to get wheels that will work instead of trying to use my stockers. This is what I ended up with. Moto Metal 951s 2 tone black 16x9, with Nitto Terra Grapplers 315/75/16 (35x12.50x16) Thanks to Heavy Hauler
a Big AZZ Texas style bumper, and everything that was chrome powdercoated black. Truck has 2.5" ProComp leveling springs, and leaf plus a block in the back for 3".
BEFORE: but lift installed
This is with the wheel turned so the tire is as close to bumper as it can get. About 1" clearance, but I can trim another 3/4" of bumper valance to get more room.
The rear of the tire touches the fender lining, but I can massage that with a heat gun because there is alot of room behind it, and it just barely touches at full lock. No spring Rub!!!!