P-Mirrors Don't move has power leaving switch

03mboomdicker · #1 (**permalink**) 02-19-2010, 03:51 PM

Well I am a superduty virgin here guys. Just purchased an 03' f250.
LOVE IT!!!!

Anyways my power mirrors don't move by the switch.
-I removed the switch and opened it up. Bent the little tabs and put back together.
-There is power to the switch
-There is power leaving the switch for the L and R mirrors
BUT THEY DON'T MOVE!
Whats the deal guys?

How can I test if there is power at the mirror?
Does the mirror glass come off?

D3R3K · #2 (**permalink**) 02-19-2010, 03:59 PM

mine had that problem and i got away with replacing the switch

03mboomdicker · #3 (**permalink**) 02-19-2010, 04:11 PM

your switch put out power to the mirrors and replacing it made them work?

D3R3K · #4 (**permalink**) 02-19-2010, 04:14 PM

yeah it was something messed up in it, are you sure the mirrors on the truck arer power and not manual, because i have seen people replace them by mistake and have that problem?

F250 Fever · #5 (**permalink**) 02-19-2010, 04:24 PM

the glass does come out though not sure how but seen a pic with them out before

03mboomdicker · #6 (**permalink**) 02-19-2010, 04:59 PM

yea they are power. I can see wires behind the mirror glass. red and yellow on the driverside I believe, pass-side i can't remember what color

03mboomdicker · #7 (**permalink**) 03-08-2010, 06:36 PM

Yea so I got some time to figure out my mirror issue. The a-hole before me must have had newer mirrors on it and threw the stock ones back on to trade it in. There was only one nut holding them in and when putting the stocl ones in he didn't feel like pulling the door panel off to plug them in...

ridiculous... thanks anyways though guys

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement