lost my tranny???

jblagg · #1 (**permalink**) 12-01-2008, 10:14 AM

I was pullin my TT back home from our Thanks giving camping trip. I pulled over to change a flat on my trailer and when I got back in it I put it in D and nothing at all.... it was like I was in neutral or park....HELP Please!!!!!

cchase · #2 (**permalink**) 12-01-2008, 10:20 AM

check your fuilds.

jblagg · #3 (**permalink**) 12-01-2008, 10:23 AM

I did and all is good never got any high temps or nothing I am lost

**nsrchofpwr** · #4 (**permalink**) 12-01-2008, 10:27 AM

linkage maybe?

**Marty** · #5 (**permalink**) 12-01-2008, 10:29 AM

Yeah, get down on the ground next to the truck and watch the linkage.

**Marty** · #6 (**permalink**) 12-01-2008, 10:30 AM

All the way back is park.

jblagg · #7 (**permalink**) 12-01-2008, 10:38 AM

I put a couple of quarts in it and it still did nothing.... After I refilled then I say leakage

jblagg · #8 (**permalink**) 12-01-2008, 10:45 AM

A friend aske me If I tried backing my programmer out and back to stock but I think its a mech issue

jblagg · #9 (**permalink**) 12-01-2008, 10:52 AM

opps you typed linkage and I thought it was leakage my mistake Ill check it out

ipz2222 · #10 (**permalink**) 12-01-2008, 02:41 PM

Reverse,?? wil it pull fwd in man low??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement