No Acceleration!!!

***Jameson*** · #1 (**permalink**) 12-19-2006, 02:21 PM

I Tried to fix my overhead display today, well it still doesnt work. I tried resoldering the resistors, but i was missing one so i bought some at Radio Shack and they were too big. So i stopped. Thats the least of my problems. Now my truck starts but i get no acceleration, when i step on the pedal it does nothing. I also noticed i dont have a Wait to Start lamp anymore. Any ideas? It ran fine before i took out the display console. Now it starts fine, with no go.

**Marty** · #2 (**permalink**) 12-19-2006, 02:38 PM

I don't think they're related.

Need more info all I know right now is you have a lariat 99-03 7.3.

***Jameson*** · #3 (**permalink**) 12-19-2006, 04:39 PM

Well it was the overhead console. When i soldered the broken resistors back to the board i mucked something up because after blowing 3 fuzes i unplugged the overhead display unit and now everything is fine. I guess im not an electrician. Thanks guys.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement