ipr valve nut

pickereldvm · #1 (**permalink**) 09-27-2010, 04:11 PM

I just replaced a couple of injectors an ran the truck for about 3 hours on the interstate. It ran great until about 20 minutes from the house. Long story short I climbed up to take a look and found the nut that holds the IPR in place was missing and the sleeve/spacer was laying in the valley. Any body know were I can get a replacement nut or what size it is???
thanks!

**Jarrod B** · #2 (**permalink**) 09-27-2010, 04:25 PM

i just ordered one from ebay.

7.3 7.3L Powerstroke Diesel IPR Valve Repair Reseal Kit: eBay Motors (item 220414694079 end time Oct-06-10 08:27:34 PDT)
7.3L Powerstroke Diesel IPR Valve Reseal & Repair Kit: eBay Motors (item 140446494430 end time Sep-28-10 06:06:02 PDT)

**DrewC06** · #3 (**permalink**) 09-27-2010, 04:32 PM

you can get it and the orings in a kit from ford for like 35 bucks

**Jarrod B** · #4 (**permalink**) 09-27-2010, 05:27 PM

really? cause about 1 month ago i called and was told they cant and have to buy the whole ipr. international might have it.

pickereldvm · #5 (**permalink**) 09-28-2010, 03:37 AM

Thanks for the response!

brraapp · #6 (**permalink**) 07-10-2011, 07:11 PM

international has them nut spacer 3 o rings 26 dollars

rivercat · #7 (**permalink**) 07-12-2011, 01:44 PM

does synthetic rotella eat the orings worse? ever since changing to it its been nothing but problems

**Jarrod B** · #8 (**permalink**) 07-12-2011, 02:51 PM

what? how long have you ran on that syn rotella? im on it and havent seen any issues yet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement