Join Date: Nov 2013
Location: Canton Texas
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
ESOF encoder contact plate positions???
Can somebody help me out with which contact plates (a,b,c,d) should be open and which ones should be closed in which transfer case position (2wd, 4 high, 4low). This info would help me a lot!
Also in my esof trouble shooting I have noticed my scanner always shows my 4wd switch position as (OFF) no matter what position the switch is in. I looked in my scanner reference manual and it states the 4wd switch position should state a range like 4hi, 4low ect... I have ohmed the switch and checked the wires to the gem for opens and shorts. Is the pid just stating the esof is disabled? Any input would be great!!! Also my gem shows no codes present unless I run the KOEO test with the 4wd switch in any position other that 2hi. Thanks! This ESOF is driving me nuts!!!
I am not here! I am Gone! I highly doubt I will ever be back!!!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.