Dynatek Free Spin Bearings

[dieselburner21]

Well guys I guess you could say christmass came early. I decided to tear apart my driver side bearing because its been squealing and I had some down time. Tearing into it Im wondering WTH this looks nothing like the write ups on the internet. Sure enough looked at the parts truck was converted to free spin bearings from dynate, and I had no clue. So looked at all the bearings all look good cleaned and re-greased everything put back together(also has warn lockouts) and now instead of squealing it hisses like a high pressure air hose leak. Anyone have experience with this kit? Or should I look at something else, I figure I must have been close to the problem since I got the noise to change but I have no clue about this Dynatek kit

[NotStock]

They have a good kit, I certainly wouldnt switch out to anything else. Have you checked to make sure nothing was making contact? Replacing those bearings shouldnt be very expensive. I would be willing to be thats where your problem lies. How did the noise begin?

[dieselburner21]

Its done it since I got the truck and the Guy I got it from didn't know anything about the truck so I've been figuring it out since...I'm not complaining I know Its a nice kit just stumbled me a little