injector not firing

fozza · #1 (**permalink**) 02-18-2009, 08:08 AM

hope someone can help as we are in the UK and are struggling.
96 f250 has had new injector driver and new injector in no 1 position as it was not firing. Still not firing checked harness for continuity. All others fire ok.
Please help.

**Marty** · #2 (**permalink**) 02-18-2009, 08:10 AM

OHM @ connector at injector #1.

**SCUFFY828** · #3 (**permalink**) 02-18-2009, 08:13 AM

have you looked for melted pins on valve cover , injector harness , and main engine harness, may have to trace it back to the driver module

fozza · #4 (**permalink**) 02-19-2009, 02:37 AM

thanks have checked wiring back to driver, continuity good.
swapped injectors and put known good one in position 1 still no fire.
As i say driver is brand new, hope its not that as you know how much it cost
and as for then shipping it here, trust me it comes expensive. thanks again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement