Replaced Powersteering Lines Blowing off waiting for response

[Live4disasters]

hey guys heres one for u... I just put in a new power steering pump and the bottom line keeps blowing off... As soon as I start the truck it pops and don't know why. Need to figure it out. I was suppose to be somewhere an hour ago and cant get there. I have been doing this since 9:30 this morning... I replaced the hose clamp to a better one still pops. I'm about to give up I really need help. I am waiting for a response I dont know what else to do

[SCUFFY828]

when you say bottom line which one the high pressure going into the side or the return line on the very bottom

[Live4disasters]

Return line on very bottom

[SCUFFY828]

never seen that before, what was the reason for replaced the old pump, same problem or no

[Live4disasters]

No the steering was tight. When my foot was on the break and it had never done it before... So i figured i would try to replace that and see what happens.

[SCUFFY828]

you probably got a bad pump, oversized tires will cause the steering to be hard when sitting still and foot on the brake , there wasnt any knid of a plug on that port ut of the box was there, sometimes the reman companies will plug off ports to keep packaging lubricant in pump while on the shelf

[Live4disasters]

ok its the line that come out of the resevoir that turns into a metal line is the one that keeps blowing off... im not sure if its the high or low pressure line also i kno oversize tires would do that but they arent oversized... and no there wasnt a plug on that one.

[SCUFFY828]

the high pressure comes out of the side and are bad to blow out thats why i asked , its metal coming out of the pump and basically touches the intercooler tube when everything is inplace , the return comes up from the bottom , the top line is also return from the hydroboost

[Live4disasters]

yea no its not .

[SCUFFY828]

then it sounds to me like its very possible that you got a bad pump