IDM Mod

Tyler · #1 (**permalink**) 03-20-2009, 01:25 PM

What exactly is the IDM mod, and what does it do?

cchase · #2 (**permalink**) 03-20-2009, 01:49 PM

it kicks up the out put fro 120v to 140v.

ask matt P more about it, he has it and loves it

**MrJohnWayne** · #3 (**permalink**) 03-20-2009, 01:50 PM

you change out a resistor inside the IDM to up the voltage to the injectors. 97 you probably have the 110 volt IDM. you can up it to 140. the more voltage the more efficiently the injectors will fire.

Tyler · #4 (**permalink**) 03-20-2009, 02:48 PM

Quote:

Originally Posted by MrJohnWayne

you change out a resistor inside the IDM to up the voltage to the injectors. 97 you probably have the 110 volt IDM. you can up it to 140. the more voltage the more efficiently the injectors will fire.

Hmm... can someone explain on how to do it?

**MrJohnWayne** · #5 (**permalink**) 03-20-2009, 04:09 PM

I've never done it. I've seen writeups on it somewhere. lemme try and find one.

Ryan Rønning · #6 (**permalink**) 03-20-2009, 04:14 PM

Is 140 the cap on how high you can go?

**MrJohnWayne** · #7 (**permalink**) 03-20-2009, 04:15 PM

Pretty sure 140 is as high as you can go

extremlx · #8 (**permalink**) 03-20-2009, 04:37 PM

Would like to see more on this

Ryan Rønning · #9 (**permalink**) 03-20-2009, 04:39 PM

I have never heard of anyone going higher but was curiose?

waynej · #10 (**permalink**) 03-20-2009, 04:44 PM

ther was a article on this in diesel power last fall....oct, nov, dec somewhere in there....make sure you order the right kind of resistor you can't get them from radio shack....digi key I think is the supplier

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement