22k mod

deathstroke97 · #1 (**permalink**) 03-01-2009, 03:17 PM

anyone no anything about the 22k mod. like how it works how to install and advantages and dis advantages. all mods i have done now are intake and 3 in dual strait pipe exhaust.

strokerguy · #2 (**permalink**) 03-01-2009, 03:18 PM

ive never herd of a 22k mod what is it?

Tony V · #3 (**permalink**) 03-02-2009, 01:19 PM

I've heard of a 10k mod. 22kmod a new one?

lingle_t · #4 (**permalink**) 03-02-2009, 01:26 PM

ok well whats a 10k mod cuz i dont know what that is??

Tony V · #5 (**permalink**) 03-02-2009, 01:31 PM

Uh im not completely sure, but it has something to do with putting a resister in your ICP and it tricks the truck to put more fuel. Someone will chime in soon im sure.

lingle_t · #6 (**permalink**) 03-02-2009, 01:35 PM

whats a CCV mod i should pry fill out my sig but i have a 2000 supercab xlt 4x4 diy intake straight pipe foils delete auto meter gauges TS 140 hp chip

Tony V · #7 (**permalink**) 03-02-2009, 01:38 PM

CCV is a must. Its gets rid of the oil in your intercooler lines and will save your turbo in the long run!

**Dave** · #8 (**permalink**) 03-02-2009, 01:48 PM

CCV mod is a complete waste of time. For those that have chips there is no need for a 10k mod or any variation of it either.

Their is a write up on the 10k mod in the 7.3 tech files. What it does is bumps up ICP a little to fool the injectors into supplying more fuel. It also idles like crap though

lingle_t · #9 (**permalink**) 03-02-2009, 01:51 PM

so how do you do this mod then

**Dave** · #10 (**permalink**) 03-02-2009, 01:54 PM

10k mod how too video
99-03 7.3L 10K resistor mod - VIDEO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement