Illuminated T/C Lock
Just thought I would help everyone out. When I did my torque converter lock-up switch, I used an illuminated switch. A regular non-lighted SPST switch doesn't need to be wired like this but since the lighted switch needs 12v and the lock-up wire only needs to be grounded, this must be done to get them both to work. I drew up the schematic about a year ago and just now drew it on the computer today, so if I don't have something correct, let me know so I can fix it.
Last edited by Lechlis; 08-30-2013 at 10:13 AM.