![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
inducer wheel
what size is the inducer wheel on my stock turbo 97?
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
It is 58mm I measured my extra turbo.
Hope this helps. Mark |
|
|||
|
will a inducer wheel help the stock turbo?
i know this is of subjects but superduty73 oh man horse do you think your getting out of you truck with the ts chip and dfuser 18k im in the process of redoing my 95 powestroke |
|
|||
|
To be ohnest with you I have no clue & hope its around 300HP
but will get it dyno'd and drag it to see how fast it is. My goal is to beat out my friend with a 5 speed 92 cummins (who said he dyno'd 575hp and 975trq) he has more done than me, and is afraid of a 6.0 with a superchip, exhaust and intake. He doesn't have that much done to his truck to have that much power though. I hope that Stage I's will boost me to his level. I think he has about 400 HP in reality.
|
|
|||
|
By the way I don't know yet since I haven't installed all my new toys! Hope its quicker, then I can decide on injectors.
And for the chip if you get one go to tony wildman, I'm getting my TS done by him... he can tune it better and incease the icp demand for fuel just as the 18k does! As for other mods you can allways take off you fan and put on an electric one, do the IDM mod, DIY intake, 3" dp and 4"exhaust & fpr shim. Good luck! |
|
|||
|
I don't know of any aftermarket or replacement wheels for the stock OBS turbo.
You will do good to get 250 HP out of a stock injected OBS. Usually they make around 210. Stage 1's will get you in the 300 ballpark. I would love to see your buddy's mod list for the Dodge. He would have to have a lot of money in it to make that kind of power. My brother has a '93 5sp that made just under 200 HP with the pump turned up as much as you can and still be drivable. |
|
|||
|
Quote:
|
|
|||
|
I only had to read it three times to figure out what he said, lol
|
|
|||
|
My buddy has a 1992 cummins 5 speed with:
intake upgraded fuel pump high flow turbo housing stage 2 injectors intercooled performance header 3" dowmpipe, 6" stack And he also said it has a surprise but I think its his cam was worked. I looked around and never saw any nos or propane. The guy that owned it before him was a diesel mechanic. He also says that he knows it has 57 psi but his gauge only goes to 30???? And to top it all off he doens't know anything about the truck... no specs like injector size, turbo housing size or even fuel pump! |
|
|||
|
haha, wow mark, know what ya mean about that mysterious yellow dodge....!!
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|