looking for cheap

[1995psd]

performance that is long lasting

[mschn99]

how cheap??

[Raul@Stealth Automotive]

good reliable performance is not usually very cheap

my suggestions are
gauge(boost,pyro,trans)
intake
exhaust
TW 6 pos chip

[CHUCK]

FPR shim ...pretty much free, if you got a bb gun around. IDM mod....if your soldering skills are up to par, cost for the correct resistor. This mod can be pricey if you screw up, new IDM will be needed. (swamps diesel sells moded IDMs for 225.00 with good core). DYI tymar intake.... cost of filter and piece of 4" exhaust pipe or pvc pipe.
After those, the cost goes up....Exhaust,intercooler,custom tunes,injectors etc.
Keep in mind, you need to install gauges anytime you start to mod.

[mschn99]

Originally Posted by CHUCK

FPR shim ...pretty much free, if you got a bb gun around. IDM mod....if your soldering skills are up to par, cost for the correct resistor. This mod can be pricey if you screw up, new IDM will be needed. (swamps diesel sells moded IDMs for 225.00 with good core). DYI tymar intake.... cost of filter and piece of 4" exhaust pipe or pvc pipe.
After those, the cost goes up....Exhaust,intercooler,custom tunes,injectors etc.
Keep in mind, you need to install gauges anytime you start to mod.

Make SURE to check the fuel pressue when doing the FPR shim...pressure too high can kill a fuiel pump.....