Tymar DIY intake

Aw9414 · #1 (**permalink**) 02-01-2012, 05:09 PM

I am doing the tymar style intake tomarrow and just wondering what do you do with that little oil hose thing that hose in ur intake. do u just let it hang?

85_305 · #2 (**permalink**) 02-02-2012, 04:18 AM

Ya just tuck it off to the side

**351fifty** · #3 (**permalink**) 02-02-2012, 06:31 AM

the hose from the valve cover?

Aw9414 · #4 (**permalink**) 02-02-2012, 12:32 PM

Ya the one from the valve cover
Thanks for telling me

mjonesjr · #5 (**permalink**) 02-02-2012, 02:01 PM

You need to route it somewhere behind the cab so the oil vapors do not enter the cab.

**ol_Blue97** · #6 (**permalink**) 02-02-2012, 04:31 PM

yea it can kinda get a little smelly

backwoodsboy · #7 (**permalink**) 02-02-2012, 09:53 PM

Quote:

Originally Posted by 85_305

Ya just tuck it off to the side

Not sure why you'd ever tuck the CCV off to the side...unless you like huffing oil vapor.
Search for 'CCV Mod'. There are a few good write up's on here.

Aw9414 · #8 (**permalink**) 02-03-2012, 03:05 AM

Well I thought it was still hooked up to the air box it has a ccv mod on it

superduty4x4 · #9 (**permalink**) 02-06-2012, 07:19 AM

There's no need to mess with the CCV for a DIY Tymar. Everything you remove and replace is in front of the CCV housing.

Aw9414 · #10 (**permalink**) 02-08-2012, 02:46 PM

Do u un plug the batterys when it's runing to relearn or when it's off or is this needed on a obs?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement