ScanGauge Fuel and Boost PSI Issues

[mjonesjr]

I've got my ScanGauge installed yesterday and the wiring all hooked up. I've got the fuel PSI kit and the boost PSI kit as well. I entered the slope (37.5) and intercept (-18.7) per the instruction sheet.

Both the fuel and boost PSI read a constant 166.7. The boost value never changes.

I have emailed Aeroforce yesterday and today and have not heard anything back from them. They don't have a phone number so that is out.


Anyone who has ever installed a ScanGauge with the extra sensors have any idea what is wrong?

[zROCK]

are u using this system? ScanGauge - Trip Computer + Digitial Gauges + ScanTools
I did not realize thier was a kit you could buy for this. Would be great if their is as then i can buy mine back from my x girlfriend and hook it up to my truck.
of its is the above. when i had to program it to read the boost on the jetta i had to try several different codes. then i also run into the issue where it had stopped working and i had to enter the exact same code in 2x before it would work

[mjonesjr]

Originally Posted by zROCK

are u using this system? ScanGauge - Trip Computer + Digitial Gauges + ScanTools
I did not realize thier was a kit you could buy for this. Would be great if their is as then i can buy mine back from my x girlfriend and hook it up to my truck.
of its is the above. when i had to program it to read the boost on the jetta i had to try several different codes. then i also run into the issue where it had stopped working and i had to enter the exact same code in 2x before it would work

No, that is a different company.

Here is the one I have.
Aeroforce Technology Inc | Products - Interceptor