Front Shackles, seen it used it heard of it?

[Soot_Life]

This company claims to get 3-5 inches out of our front end for $150 bucks wondering if it acctually works or if itsets the geometry of the truck all wrong..
92-97 F-250/F-350 front shackle reversal - Sky's Off-road Design

looks like a frame drop to me so i see no problems with a front solid axle truck.

wondering what the 3" would do to the TTB front end tho.. as in could it be alighned after this install?

[charliesnyder]

This is the basic design of the RSK that CaryT on here offers as well. Your looking at quite a bit more than 150. I think the 3" kit is around 300.

[Cory S]

alot ppl run those i did on my obs makes the ride 10x better dont use it with a ttb. made to use with d60 and they are 300 for 3' and 450 for 5'

[Garbage_Mechanic]

It can be done on F250 TTB, just harder. Have to use drop brackets for the TTB pivots. Sky's is a good company.

[CT Performance, Inc.]

Cannot be done on a F250 without a D60 IMO changes the way a TTB cycles..and is throwing $$ down a hole..again IMO Get a D60 then a RS kit and SD springs if you want a great riding truck.

Cary