D60 Parts List

[Big Blue Stroker]

I was wondering what all i needed for a complete Dana 60 swap on my 250. Thanks.

[Rantheman]

Well first the D60 With matching ratio to the rear end. track bar and bracket, steering minus the pitman arm yours should work.if you can get the sway bar but it optional. then update the brakes if needed, also importand driver side ubolt bracket if it does not have one then you can get one from a SD you will need longer ubolts if you use the SD bracket. thats all I can remember off the top of my head

[Big Blue Stroker]

What is the track bar and bracket?

[Big Blue Stroker]

The tie rods?

[alberta 7.3]

The track bar is a bar that parallels the drag link. Basically, it prevents the axle from side-shifting and changing the steering position.

[terryknight]

What yr D60 you get has alot to do with what you need. If you get an 1980 - 1997 D60. You need the axle, track bar and bracket (mentioned above), brakes from a 350 (the caliper size is the same but the TTB has slide calipers the D60 has bolt on), It is easier to do with 350 springs too, and I forget whether you need to change yokes on the pinion.

[97powersmoker]

dollllllllllllllllll

[CT Performance, Inc.]

Ive help hundreds do this mod...PM me if I can help.