super duty seat wireing help? - Ford Powerstroke Diesel Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 14 Old 03-16-2013, 10:00 AM Thread Starter
Compression Ignition Addict
 
Ray Bennett's Avatar
 
Join Date: Mar 2010
Location: Clear Spring , Md
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
super duty seat wireing help?

Ok, I have done searches on how to wire up my superduty seats in my 97. however i have 7 wires going into the driver seat and i think 5 going into the passenger, most searches say its just a hot and cold but not on mine, any help would really be appricated, For what its worth the seats are out of an 08 lariat

Just bought!, 1997 F350 CCLB 5 speed manual, For now the only mod is the 4" straight pipe
2002 extended cab long bed 7.3, 3.5" lift with 37x 12.50 Terra Grapplers on 17" Pro Comps, ts 6 pos chip, 05 grille, DIY 6637 air intake, 4" MBRP exhaust with muffler delete, Built trans with PI TC tugger shift kit and suncoast 5 disk drum, custom made one peice drive shaft, Edge CTS
Ray Bennett is offline  
post #2 of 14 Old 03-26-2013, 09:12 PM
Electrical Ogre
 
alberta 7.3's Avatar
 
Join Date: Aug 2007
Location: Calgary, Alberta
Posts: 12,130
Thanks: 30
Thanked 79 Times in 76 Posts
Mentioned: 1 Post(s)
Quoted: 102 Post(s)
Feedback Score: 1 reviews
Post up the wire colors on both the driver and passenger seats. I may be able to help if they have the same power/heat wiring as the 06 donor stuff I put in my '00

Bill

1996 F250 SC/SB 4X4 XLT
1997 F250 RC/SB 2WD project
2008 F350 CC/LB 4X4 DRW Lariat, 3" cow catcher mod
2008 Ranger SC FX4
Quote:
Originally Posted by weareweird69 View Post
If your posting pictures bill, everyone dim their screens, that CAT YELLOW is bright
Quote:
Originally Posted by Fordman247365 View Post
Is there anything you DONT take apart and **** with?
Quote:
Originally Posted by JJFLASH View Post
I still say that those Dodge mirrors have as much business on a OBS Ford as yoga pants have on a fat chick...my .02
alberta 7.3 is offline  
post #3 of 14 Old 03-26-2013, 09:39 PM
DERAIL MOD!!!


 
351fifty's Avatar
 
Join Date: May 2011
Location: Canton and kennesaw
Posts: 23,180
Thanks: 34
Thanked 207 Times in 195 Posts
Mentioned: 1 Post(s)
Quoted: 3 Post(s)
Feedback Score: 4 reviews
His wiring is going to have memory as well, sorry I don't know the wire colors off hand

-Kris-
2000 excursion V10 2wd 230k
2000 Excursion 7.3 4x4 246k
1995 CCLB DRW 324K
2001 CCLB DRW 319K
Dp tuner infinity, exhaust, intake, chipped, tricked, and wrecked


Quote:
Originally Posted by marine5811
The stock downpipe in an OBS is flat because I'm a ginger.
Quote:
Originally Posted by alberta 7.3
Finding a decent woman is like shopping for a used truck. You spend most of your time picking through the money pits, wrecks, and basket cases until you find one that you can tolerate
Quote:
Originally Posted by JJFLASH
Well at least you caught the loose bolts before they cause any damage. Nothing worse than a sloppy hole
351fifty is offline  
post #4 of 14 Old 03-27-2013, 03:47 AM
Compression Ignition Addict
 
Ranzan's Avatar
 
Join Date: Jun 2009
Location: Regina S.K.
Posts: 418
Thanks: 0
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Quoted: 12 Post(s)
Feedback Score: 0 reviews
Ray i have the harness diagrams for the 08 to 10 trucks
I will be going through them in the next day or so since I am putting them in my truck as well... and i will let you know what they are
off my top of my head the BLK-VLT is the hot for seats and console if you have it

Wes

2010 F350 CCLB 4x4 Lariat Sterling Grey
11 and up Console upgrade
2 1/2 levelling kit

1995 F350 CCLB XLT Stock for now....

1997 F350 CCLB 4x4 5 speed Tourmaline green
DDP Stage 1`s
08 Bucket console upgrade ( SOLD )
Ranzan is offline  
post #5 of 14 Old 03-31-2013, 12:42 PM
Compression Ignition Addict
 
Ranzan's Avatar
 
Join Date: Jun 2009
Location: Regina S.K.
Posts: 418
Thanks: 0
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Quoted: 12 Post(s)
Feedback Score: 0 reviews
Ray sorry it took so long
Do you know if your seats have memory ?
There will be a black rectangle box with a computer board in it
It is screwed into the bottom of the drivers seat

Wes

2010 F350 CCLB 4x4 Lariat Sterling Grey
11 and up Console upgrade
2 1/2 levelling kit

1995 F350 CCLB XLT Stock for now....

1997 F350 CCLB 4x4 5 speed Tourmaline green
DDP Stage 1`s
08 Bucket console upgrade ( SOLD )
Ranzan is offline  
post #6 of 14 Old 03-31-2013, 01:14 PM
Compression Ignition Addict
 
Ranzan's Avatar
 
Join Date: Jun 2009
Location: Regina S.K.
Posts: 418
Thanks: 0
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Quoted: 12 Post(s)
Feedback Score: 0 reviews
Ok going off you passenger plug this how your wiring works
You should have 5 wires in it

Ye-rd is upper heat pin 1
Gy-rd is main hot. Pin 2
Gy-ye is heat switch pin 3
Gn is heat bottom. Pin 6
Bk-vt is ground. Pin 8

Now the ugly side lol

8 wire drivers side

If you have memory there will be no gy-rd instead it is just black that is pin 1

Gn-bu mem. Pin 2
Ye-rd heat upper. pin 3
Gn-rd mem pin 4
Bk-vt ground pin 5
Bk-wh seat belt chime pin 6
Wh-bu heat switch Pin 7
Gn heat bottom pin 8

Hope this helps

Wes

2010 F350 CCLB 4x4 Lariat Sterling Grey
11 and up Console upgrade
2 1/2 levelling kit

1995 F350 CCLB XLT Stock for now....

1997 F350 CCLB 4x4 5 speed Tourmaline green
DDP Stage 1`s
08 Bucket console upgrade ( SOLD )

Last edited by Ranzan; 03-31-2013 at 07:20 PM.
Ranzan is offline  
post #7 of 14 Old 03-31-2013, 03:04 PM
Compression Ignition Addict
 
Ranzan's Avatar
 
Join Date: Jun 2009
Location: Regina S.K.
Posts: 418
Thanks: 0
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Quoted: 12 Post(s)
Feedback Score: 0 reviews
Wait ..... Heat switchs are different .... I have to dig my sheets out

Getting old and senile


changed it

Wes

2010 F350 CCLB 4x4 Lariat Sterling Grey
11 and up Console upgrade
2 1/2 levelling kit

1995 F350 CCLB XLT Stock for now....

1997 F350 CCLB 4x4 5 speed Tourmaline green
DDP Stage 1`s
08 Bucket console upgrade ( SOLD )

Last edited by Ranzan; 03-31-2013 at 07:30 PM.
Ranzan is offline  
post #8 of 14 Old 03-31-2013, 05:56 PM Thread Starter
Compression Ignition Addict
 
Ray Bennett's Avatar
 
Join Date: Mar 2010
Location: Clear Spring , Md
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Thank you so much, well you and everyone else, that really saved the day

Quote:
Originally Posted by Ranzan View Post
Ok going off you passenger plug this how your wiring works
You should have 5 wires in it

Ye-rd is upper heat pin 1
Gy-rd is main hot. Pin 2
Gy-ye is heat switch pin 3
Gn is heat bottom. Pin 6
Bk-vt is ground. Pin 8

Now the ugly side lol

8 wire drivers side

If you have memory there will be no gy-rd instead it is just black that is pin 1

Gn-bu mem. Pin 2
Ye-rd heat upper. pin 3
Gn-rd mem pin 4
Bk-vt ground pin 5
Bk-wh seat belt chime pin 6
Wh-bu mem. Pin 7
Gn heat bottom pin 8

Hope this helps

Just bought!, 1997 F350 CCLB 5 speed manual, For now the only mod is the 4" straight pipe
2002 extended cab long bed 7.3, 3.5" lift with 37x 12.50 Terra Grapplers on 17" Pro Comps, ts 6 pos chip, 05 grille, DIY 6637 air intake, 4" MBRP exhaust with muffler delete, Built trans with PI TC tugger shift kit and suncoast 5 disk drum, custom made one peice drive shaft, Edge CTS
Ray Bennett is offline  
post #9 of 14 Old 03-31-2013, 06:03 PM Thread Starter
Compression Ignition Addict
 
Ray Bennett's Avatar
 
Join Date: Mar 2010
Location: Clear Spring , Md
Posts: 275
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 0 reviews
Thanks for the help , it was well worth the wait, sorry for being so slow getting back to ya. been working a lot. I was wondering how you wired a switch in to control the heat or did you just leave the heat wires un hooked?


Quote:
Originally Posted by Ranzan View Post
Ray sorry it took so long
Do you know if your seats have memory ?
There will be a black rectangle box with a computer board in it
It is screwed into the bottom of the drivers seat

Just bought!, 1997 F350 CCLB 5 speed manual, For now the only mod is the 4" straight pipe
2002 extended cab long bed 7.3, 3.5" lift with 37x 12.50 Terra Grapplers on 17" Pro Comps, ts 6 pos chip, 05 grille, DIY 6637 air intake, 4" MBRP exhaust with muffler delete, Built trans with PI TC tugger shift kit and suncoast 5 disk drum, custom made one peice drive shaft, Edge CTS
Ray Bennett is offline  
post #10 of 14 Old 03-31-2013, 07:28 PM
Compression Ignition Addict
 
Ranzan's Avatar
 
Join Date: Jun 2009
Location: Regina S.K.
Posts: 418
Thanks: 0
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Quoted: 12 Post(s)
Feedback Score: 0 reviews
edited the list
pin 7 drivers side is the heat switch

I still need to run my power lines in the cab

I looked for a aftermarket heated seat button but no luck
Ford does not have a high low on their seats its just on or off
I have 2 rocker switches to mount on the dash for my seat buttons

one other thing ford wiring requires a 30 amp fuse for each seat and a 20 amp for the console

speaking of which forgot to list the console wiring colours


rd hot pin1
bk-vt ground pin 2
bu-rd hot pin 3
bk-vt ground pin 4

I did not check to see which set leads to front and rear power point
but pretty easy to figure out

Wes

2010 F350 CCLB 4x4 Lariat Sterling Grey
11 and up Console upgrade
2 1/2 levelling kit

1995 F350 CCLB XLT Stock for now....

1997 F350 CCLB 4x4 5 speed Tourmaline green
DDP Stage 1`s
08 Bucket console upgrade ( SOLD )
Ranzan is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Ford Powerstroke Diesel Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome