160cc injector ??

[Got Diesel?]

Some people have told me that my hpop will be able to handle 160cc injectors and then some say my hpop will not be able to send enough oil to the injectors. so what should i believe????

[Dirk]

Stage 1 160cc? sure.
Stage 2 160cc? You'll want a 17* pump.

All depends on the tune you are running.

[Got Diesel?]

it will be the stage 1 160cc injectors with the stock nozzels i will be using my dp tuner chip

[1badpsd]

it will handle them fine but it will throw a cel but its no big deal. FWIW you should get a 60psi boost gauge cause you'll be makin more than 30psi of boost

[cchase]

Originally Posted by 1badpsd

it will handle them fine but it will throw a cel but its no big deal. FWIW you should get a 60psi boost gauge cause you'll be makin more than 30psi of boost

doubtfull.......

[Dirk]

Originally Posted by 1badpsd

it will handle them fine but it will throw a cel but its no big deal. FWIW you should get a 60psi boost gauge cause you'll be makin more than 30psi of boost

I wouldn't think you will make more than 30 on stage 1's and a stock turbine housing. If you had a quick spool small housing, maybe. Good way to over spin and kill that turbo if you did.

[PSD0389]

Oops I just tried flooring my truck on extreme with the OD turned off at 60 to see how everything does for the dyno and I hit 37 pounds of boost

[1badpsd]

yea i can hit 38psi and if i stay in it i throw a cel

[PSD0389]

Yep it definitely throws a CEL when I stay on it as well the boost guage was flickering between 37 and 40

[1badpsd]

if i blow the turbo all the more reason for an H2e