Intake hose/adapter size??

monoski · #1 (**permalink**) 08-28-2007, 01:52 PM

Hi,
Does anybody know what the size of the factory orange silicone hose between the intake on the heads and the factory splitter/'Y'/plenum above the valley between them? I am thinking it is a 1.75" to 2.0" transition. Ford just gives a part # and no description. I did not really want to tear it apart until I get them. Mine are leaking -- too much oil soak -- time for a CCV mod.

Thanks in advance.
Matt.

#2 (**permalink**) 08-29-2007, 12:02 PM

they are 2". Just go to a truck parts store and see if they have any 2" gates water hose. Its thicker and tougher than the factory boots.

Goose · #3 (**permalink**) 08-29-2007, 12:08 PM

no hi jack but whats the ccv mod

**pipelayerjdh** · #4 (**permalink**) 08-29-2007, 12:20 PM

It's re-routing the Crank-Case Vent from going into the intake and filling the intercooler with oil.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement