Compression Ignition Addict
Join Date: Feb 2010
Location: Farmersville/Dayton, Ohio
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Feedback Score: 1 reviews
Inector and HPOP swap, parts list ?'s
Well i'm going to be putting in a set of AD's in the truck this weekend, and i'm wanting to swap in the 17* HPOP and newer IPR. All the parts are out of a bus motor with 111k'ish miles, and the injector solenoids say Alliant power so they are either new or re-mans. Anyways what all gaskets and small stuff do i need to get? I'm going to order everything i can off dieselorings.com, so i need to order them tomorrow so i can have them by the weekend. I haven't checked on the fuel lines yet, but i will get some line and cut them myself or just go to Ford and get what i need.
Here is what i have so far:
1- #14-008 IPR O-ring Kit - O-ring IPR Repair Kit Internal o-ring and fiber backup..
1- #8-017 HPOP reservoir gasket 1996 - 1999.5 - HPOP Reservoir Gasket 1996 -1999.5
8- #14-020 Alliant Injector o-rings - Exterior - Injector O-rings
1- #8-009 High Pressure Oil Pump mounting gasket 96-03 7.3L - High Pressure Oil Pump Gasket
97 F-250 ECLB 7.3/E4OD/4wd, 216k miles: FFD 250/200%'s, stock turbo, built trans, e-fuel, Swamps IDM, shimmed 910's, Melling LPOP, welded cam gear/modified pick-up tube. Built and tuned by me
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
97 F-250 ECSB project truck:250/2's, Gen 3, S468, SD axles, studs/springs, ZF-6