hey guys few questions,i have four big yellow wires coming out of the ignition switch.all of them have 12v all the time.then theres a big red with geen stripe which has power in run and crank only.another one is a black with green stripe that has power with key on only.then there is two more big ones which are both grey with yellow stripe that only have power with key on.my remote system needs constant 12v and ignition wires.it says there should only be at most two contant 12v wires,but theres 5 yellow wires with 12v all the time.
4 big and one small.can someone find a diagram or something,i cant find any info anywhere.thanks
10-01-2009, 06:28 AM
Linear Mode
