crew cab on reg cab frame?

[ArrestMeRed04]

Anyone know if all the mounts would be there? I know it'd take some work but is like ti have the extra seats, make up a short flat bed for the rear

[Buffalo444]

it'll take fab, but it's been done. on here actually....

[ArrestMeRed04]

Any pictures of how it turned out?

[ArrestMeRed04]

Any pictures of how it turned out?

[351fifty]

I know a guy that did it on an idk never seen a psd, but I'm sure it would be simple only the forward body mounts would work, the rest need to be made, and your bed would only be about 3 feet, mite as well just make an excursion obs while your at it

[ArrestMeRed04]

If the cab will fit inbetween the front and rear wheels the bed would end up at about 5fteet. I've got a toolbox that is about 2ft deep now so is really only be giving up about a foot, if I built a falt bed and put a toolbox on each side under the bed. Guess ill go measure my uncles crewcab tomorrow, ill check out the cab mounts while I'm at it, maybe the front and middle will line up with my cabs front and rear

[alberta 7.3]

SD crew on OBS frame, same idea but a SD crew donor.

95 OBS to SUPERDUTY CONV. - PowerStrokeNation

[351fifty]

Cab will fit, that short of a bed will look funny tho IMHO, look like an f350 rock crawler I saw a while back on your tube

[ArrestMeRed04]

That super duty swap is awesome. Is the rock crawler your talking about on youtube a white one? If so i think thats kinda the look ill be going for, just without the full cage.

[Ole Nasty]

Got these from Pirate4x4.com.


90 standard cab frame and 91 crew cab body 80 front clip and 80 shortened bed

There's a few others in here.
Lets see your crew cab fords!! - Pirate4x4.Com Bulletin Board