Ford Powerstroke Diesel Forum banner

Need advice on frame rust.

2K views 5 replies 6 participants last post by  simpleman88 
#1 ·
I just purchased my first PSD. A 1997 F250HD supercab 4x4. The frame has some flaking rust on it and I want to remove it and get it undercoated or something to that effect. Any suggestions on what I should do?
 
#4 ·
Wire wheel on the grinder, then spray the frame with a rust converting primer, then undercoating.
 
#5 ·
lots of people would say POR15. I've never used it so I can't give you my experiences with it, but when I did mine I washed it with a pressure washer and then took a wire wheel to it and a wire brush in the harder to reach places. Then primer and paint
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top