Ford Powerstroke Diesel Forum banner

E9TB 15A411-BA DUALLY BED FENDER LIGHT

2K views 6 replies 3 participants last post by  ptp 
#1 ·
DOES this come apart any further?
seems the whole unit must be replaced?

seems the yellow is fused to the plastic?
anyone?
 

Attachments

See less See more
2
#2 ·
They do not come apart. You simply replace the light assembly unit with something like this: Truck-Lite 15200Y. Napa will also have TL-15 series lights, but it will probably have the bezel and you will probably have to splice the wires. Cheers!
 
  • Like
Reactions: ptp
#3 ·
thanks,
it's an odd lamp to me sealed up like that....non-serviceable!


i actually found one ebay, amber.....$16

Ford OEM 1984-1997 Amber Side Marker Lamp EOTZ-15442-B Rectangular Factory

the part number I had above was for the harness,

GUESS THAT'S ONE MARKER LIGHT NONE HAS FOUND A LED FOR!???

Now, I hope the red ones don't blow because I CAN NOT FIND a red one...only amber!
 
#4 ·
Truck-Lite has 15-series 12V LED lights in both amber (15250Y) and red (15250R). Cheers!
 
  • Like
Reactions: ptp and ZMANN
#6 · (Edited)
Good call on that and I'll bet they do blind you! The 15250R shows as one diode and 15250Y shows as 3 diode. Strange????. Cheers!
 
  • Like
Reactions: ptp
#7 ·
Thanks for all this/that,

the OEM one i ordered f/8$ went missing USPS only now getting a refund....
.gonna stick to the dimmer OEM amber for now/reorder

keeping 194 BULBS in my license plate as well.....
.not sure i really want a very bright license plate..
...... been out for a decade!...CA law says visible at 50ft & illuminated,
now that my rear deck is 4 ft long...may actually only temp the visibility argument.

the one that's out is passenger side, AND has been so for a while.

Since going HID upfront, DS2 ...... pointed them way down.
but still get low-oncoming-traffic NOT HAPPY with them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top