|
Crank but no start issue
O.k. I have a 95 F-350 PSD and for a while I have a had a cranking but no start condition.. Here is what I know and did.. I replaced the CPS twice. The first time it was bad after that the truck started ran for about 10 minutes and died, I pulled the IPR and replaced the o rings. New oil and filter as well as fuel.. Fuel has about 50 PSI cranking.. IPR is at 15%? Oil pressure seems to be good. I have a reoccurring code.. Concerning
The IDM which I have also replaced?.. Here are the codes the IDM on is the reoccurring..
P1271
P1273
P1298
any help would be greatly appreciated thanks in advance!!
Sent from my Autoguide iPhone app
|
09-10-2012, 03:43 PM
Linear Mode
