View Single Post
  #30 (permalink)  
Old 01-31-2007, 04:33 PM
bigolhunter69 bigolhunter69 is offline
Powerstroke.org Rookie
 

Join Date: Jan 2007
Posts: 4
thanks!!!

you dont even know how much this helped me i could of swore i needed a new turbo wheel or rebuild due to the hissing sound. Now i've heard if you take a tube off the turbo and check the wheel: if its loose then it needs a rebuild. FACT OR FICTION another thing i'm dealing with is from what i've read on here my injectors are leaking and its getting bad, i drive a lil tacoma to school and work due to the distance and decreasing fuel, wear, and tear of my powerstroke. I walked out to crank it and then let it idle for about an hour since it hadn't been ran in about 4 weeks. i went out and there was about a good 2 ft x 1.5 ft puddle and it was slowly dripping with just a little hesitation. I NEED HELP!!! COULD POSSIBLE END UP BEING MY SENIOR PROJECT IF A LOT OF LABOR IS NECESSARY AND DUE TO THE FACT I HAVE 140000 MILES ON IT I FIGURED I'D THROW A CLUTCH, INTAKE, AND 4'' DOWNPIPE ON IT TO FINISH MY 20 HOURS OF MENTOR WORK TO GRADUATE HIGHSCHOOL. thanks hope i'm not bothering you but seems like you know what your talkin bout
Reply With Quote