Dead in the water this morning

y8earp · #1 (**permalink**) 12-28-2006, 03:55 AM

My truck wont start this am. Someone suspected the glow plug relay might be bad. Problem is I can't start the truck to get it to the shop. Any tips on how I can get it started? Been hard to start the past couple of days. I have a forced air heater...could I warm it enough that way? Maybe tap on the relay? Maybe blow up the truck? Please help. 02 PSD Y8

**Dave** · #2 (**permalink**) 12-28-2006, 04:31 AM

plug the block heater in for an hour or two that will help

y8earp · #3 (**permalink**) 12-28-2006, 04:41 AM

I've had it plugged in all night but it didn't seem to help much.

**Dave** · #4 (**permalink**) 12-28-2006, 04:56 AM

is it firing at all

y8earp · #5 (**permalink**) 12-28-2006, 04:59 AM

no, it just cranks over and over

**Dave** · #6 (**permalink**) 12-28-2006, 05:00 AM

sounds like a cps to me

y8earp · #7 (**permalink**) 12-28-2006, 05:03 AM

I just installed a new one a month ago. It's really been hard to start on the cold mornings. after the engine warms it is fine. this morning it won't start at all.

**Dave** · #8 (**permalink**) 12-28-2006, 05:05 AM

glow plug relay is a possibilty then easy repair takes 15 minutes or so there is a thread on how to do it in the 7.3 tech files

y8earp · #9 (**permalink**) 12-28-2006, 05:08 AM

thanks, I appreciate it. I just needed to get it started so I could get to the shop. Maybe just need to wait until it warms up.

***Jon*** · #10 (**permalink**) 12-28-2006, 05:09 AM

or even just one glow plug it will crank but not fire most of the time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode