7.3 stalling when stopping.

[BlackCloudStroker]

Truck stalls somtimes when stopping, but starts right back up and drives away. Not throwing any codes. Some days it dose it, but most of the time it is fine. Any ideas?

[mschn99]

checked your tranny fluid level? Also...do you have a manual torque converter lockup? maybe a problem with the switch for that.....a couple thoughts anyway

[BlackCloudStroker]

Yes i have a manual tc lock, i will check it. I dont think the light is coming on though and i think it still dose it when the switch is off, but ill check it anyway. Tranney fluid is good. The only thing that comes up after it dies is the battery light.

[Diesel_Diagnostician]

Does it only stall when your stopped or does it stall/shut off when your driving as well?

[akduece50]

what is the 140 horse 3 way chip and can it be stacked with the edge. i have a 2000 7.3 with the 100 horse edge and i want a little more power, Thanks man!

[straycat]

Originally Posted by akduece50

what is the 140 horse 3 way chip and can it be stacked with the edge. i have a 2000 7.3 with the 100 horse edge and i want a little more power, Thanks man!

Hi, you might want to post this in the 7.3 performance forum, you will get more response that way. Your just probably not aware of the different forums, so thats cool, but this is what is called a hijack, jumping into another subject on a thread already being discused. I'ts no big deal, just thought I'd let you know.

Gord.

[SCUFFY828]

i have seen cam sensors going out cut off at stop start back up and not set a code

[dfuser]

It almost sounds like a CPS going bad.

[hoax23]

Im having the same problem. Im going to check my connections for me edge to the sensors to see if that is what it is. It stalled on me yesterday and I need to get it fixed. BlackCloudStroker keep us posted if you get it fixed.

[pmonville]

I Had The Same Problem With My 2001 FPS @ 134,000 Mi. It Turned Out To Be The CPS Cost About $168 From The Dealer.