![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 911 Urgent Situations Emergency Forum , Need Help Fast ? Post Here ! Urgent Topics Only |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Early '99 F350 7.3l
Long story short I burnt the insulation off some wires putting a custom rear bumper on. They shorted out after making contact with each other and blew fuses. I fixed wires, replaced relay and fuses in drivers side fuse panel, and even took radio out and replaced the flasher. I still have no signals, hazards, or brake lights! This is my only vehicle and I need it to work right and can't afford a shop bill or have it in shop for a long time... Is there something I'm missing??? Could something else be fried?? Please help FYI when I turn either signal on or hazard on there is no click from the flasher or indication light on panel |
| Sponsored Links | ||
Advertisement | ||
|
|||
|
I know this is over a month old but-look at multifunction switch on steering column. WD40 in 4way button and on/off 30 times sometimes can revive it for a while-else it has to be replaced.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Tags |
| brake, electrical, issue, light, wiring |
| Thread Tools | |
| Display Modes | |
|
|