2003 F-250 6.0L No Start

PlatinumDiesel · #1 (**permalink**) 06-29-2012, 10:54 AM

i replaced the oil cooler, put it all back together, started it, and it ran fine. idled for about 30 minutes no problem. test drove it, and it died. will not restart. i dont have a lot of experience in the early 03 department so any tips would be handy. I have a Snap-On Solus Pro and i checked ICP where the desired value needed to be about 1400 and the actual value showed 34.5-35... obviously this is looking like a good place to start.

PlatinumDiesel · #2 (**permalink**) 07-08-2012, 04:24 PM

Since I got NO help here.. It turned out to be the ipr.. Replaced it and the icp sensor, fired up first try.

Sent from my Autoguide iPhone app

**xu67585** · #3 (**permalink**) 07-08-2012, 05:20 PM

Glad you figured it out! Thanx for the info!

Sent from my SAMSUNG-SGH-I777 using AutoGuide.Com Free App

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement