Quote:
Originally Posted by tubular031
the couple times I have seen this talked about in other forums they usually say they install them after the loop to pull the coolant rather before the loop pushing. If you call in a warranty on this pump, i would not tell them that you installed it on a truck. they will probably tell you where to go  |
I cut the plug off to wire it and i will have to explain that... i likely won't get my money back. The pump isn't ruined, if i have to i will try to round out the inllet/outlets with some heat and reinstall it on the cool side and see what happens. The inlets are just a little out of round.