Hey Adam, I have been interested doing this to mine but haven't had the time. I'm to busy mak'n big HP and lift on mine. My son has a 99 super that didn't come with the factory fog lights. He told me the harness is there. He wants me to hook up his new lights to work independant of the factory ones. I have had to make mounting brackets for some of my switchs. I used some old street sign. I drilled holes, then put the piece in the vise to make the bend into an angle shape. There are factory bolts on the bottom edge of the dash on either side of the steering wheel to fasten the bracket to. This way you don't have to drill a hole in any part of the dash. Find a keyed power sorce to hook up to the switch. Drill a hole through to the engine bay via the clutch plug. Feed the wire through and follow the factory harness up front. Once there you can tap into the power wire for the fog lights. You don't have to cut the wire either. That way they will still work the old way too. Also you can get toggle switchs that light up when in use. This is really easy and if you take the time when running the wires, putting them into the corregated factory harness, only you will know its there. Good luck Bill
